** CRL-Blumcraft® Brushed Stainless 1301 Entry Door 1/2" Glass w/Fixed Closer and Standard Top Pivot - No Lock

• More Glass, Less Metal — maximized vision and contemporary appeal
• Fully glazed with 1/2", 5/8" or 3/4" (12, 16 or 19 mm) tempered glass
• Ready to install — no assembly required
• Solid stainless steel or bronze rail construction
• Rails as slim as 3/4" x 3/4" (19 x 19 mm) for a minimalist look
• Available complete with egress handle if required

CRL-Blumcraft 1301 Series Entrance Doors (SKU: 13F12BS) are the original high-vision entrance system — often imitated but never matched. Designed as a frameless glass entrance door system, the 1301 Series delivers maximum glass area with minimal metal framing for modern storefronts, commercial lobbies, and architectural entrances.

Made from solid stainless steel or bronze, finishes include brushed, mirror, and oil-rubbed bronze. Top rail sizes vary based on hardware; consult Technical Sales for guidance on your specific tempered glass pivot door application.

A standard 1301 Series system includes the C7500 Series head channel with adjustable top pivot and a customized floor closer, providing ample installer adjustment. Common header options include 4", 4-1/2", and 6" (102, 114, and 152 mm) to meet design and load requirements.

When floor-mounted closers are not possible, configure the 1301 Series to work with an overhead concealed door closer: a custom 1" (25 mm) high top rail with sideload adaptor and specially designed bottom pivot keeps the installation clean while maintaining the "more glass, less metal" aesthetic.

Fully glazed sidelites with matching top and bottom rails are available. For field-glazed fixed panels, Wet Glaze Channels are offered to simplify installation of glass storefront systems.

Product Warning:

STRUCTURAL DISCLAIMER - Customers must consult a structural engineer to confirm product suitability for intended use and site conditions. Installers must be qualified and ensure compliance with local, state, and federal regulations, safety factors, and proper fixing materials and procedures.

Stainless Steel Advisory: