CRL Custom-Painted Frameless Double Door Header for 1/2" Glass

• Adds rigidity and helps stabilize all-glass entrances and glass storefront openings
• Special order only (custom lengths and finishes)
• For glass-to-glass or glass-to-wall installations — compatible with or without overhead concealed door closers
• Several stock architectural finishes available; custom finishes available upon request
• Each floating header is customized to your project requirements

CRL Floating Headers With Fin Brackets (SKU: FH4FPTCD) were developed to add rigidity to all-glass entrances and reduce deflection from wind, stack loads, or impacts. Suitable for single or double door installations and common glass storefront applications, these floating headers accommodate custom lengths, glass-to-wall configurations, and prep options for surface-mounted magnetic locks, magnetic shear locks, surface-mounted top pivots, walking beam pivots, or overhead concealed door closers. Header profile measures 4" x 1-3/4" (102 x 44.5 mm). For design assistance or quoting on custom finishes and lengths, contact CRL Technical Sales.

Product Warning:

STRUCTURAL DISCLAIMER — Customers are solely responsible for consulting a structural engineer to confirm product suitability for intended use and site conditions. Installers must be qualified and comply with local, state, and federal regulations, safety factors, and appropriate fixing materials and procedures.

If the weight of the transom above the header exceeds 100 lbs. (45.4 kg), the transom must be supported from the ceiling to relieve the header and prevent bowing. Use Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings, or contact our Technical Sales Department for assistance.

Order custom CRL floating headers (FH4FPTCD) today — contact CRL Technical Sales to get started.