CRL Off-White Wood Sash Putty 3 Gal — Paintable Window Repair Putty

• High-quality formulation for face glazing of wood sash and window frames
• Applies smooth and evenly—ideal as a traditional window glazing putty

CRL Wood Sash Putty (SKU: 5003GL) is formulated specifically for application to wood sash and window frames. Its off-white color blends with most unfinished wood surfaces and provides a uniform base for oil-based paints.

Surfaces should be clean, dry, and frost-free. For best results, prime wood first with an oil-based primer. When re-glazing, remove all old putty and bedding. If necessary, warm and soften by rolling glazing in your hands. Smooth glazing to an angle that sheets water. Typical dry time before painting is four to six weeks, depending on temperature and humidity. Putty must be painted after it has skinned over and attained a firm set. For durable results, use a high-quality oil-based paint. Off-white putty is supplied in factory-sealed plastic containers to preserve freshness and shelf life. Available in five retail sizes with attractive over-the-counter labeling.

Technical Data: Meets Federal Specification TT-G-410E; ASTM C669-75, C669, D2249, D2376, C797.

Product Warning:

Important: Do not thin this putty. Do not add solvents, oils, or color pigments—putty cannot be tinted or colored by adding pigments.

Mixing Instructions: Mix the ENTIRE contents of the container prior to use. Empty the entire container onto glass or plastic and work the oils into the putty until uniform. DO NOT mix small amounts at a time—partial mixes can be too dry or oily. DO NOT mix on cardboard, which will absorb needed oils.

Check the spec data sheet for additional application guidelines and limitations.

Note: Best-by shelf life is 6–8 months when properly stored in a sealed container.

Shop CRL Wood Sash Putty (SKU: 5003GL) for reliable window glazing—add to cart now.