Most shipping weights are approximate and have not been verified. If the exact weight is needed to determine shipping costs, request this information prior to submitting your order by contacting CRL Customer Service. Product images are of the actual product or a close representation; colors may vary depending on your monitor settings.
CRL
CRL Satin Anodized Floating Header for Concealed Closers - Custom
CRL Satin Anodized Floating Header for Concealed Closers - Custom
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Item# FH4SACS
Shipping Weight: NA
Shipping Limitations: None
Minimum Order Quantity: 1
Unit of Measure: each
Compliance and Restrictions
Warning: Reproductive Harm
www.p65warnings.ca.gov
Shipping Weight: NA
Shipping Limitations: None
Minimum Order Quantity: 1
Unit of Measure: each
Compliance and Restrictions
Warning: Reproductive Harm
www.p65warnings.ca.gov
Description
Door Configuration
Single Door
Finish/Color
Satin Anodized
Glazing Thickness
1/2 in. (12 mm)
Height
1-3/4 in. (44 mm)
Length
Specify
Width
4 in. (102 mm)
Overview
- Available for Glass-to-Glass or Glass-to-Wall Installations
- For use With or Without an Overhead Concealed Closer
- Available in Many Stock Finishes
This CRL Floating Header System (SKU: FH4SACS) is available in custom lengths for both single and double glass door installations. Designed for frameless glass wall and glass door openings, the floating header provides a clean, architectural solution for glass-to-glass and glass-to-wall applications and can be specified with or without an Overhead Concealed Door Closer. Offered in five stock architectural finishes; for custom or special finishes please contact CRL Technical Sales.
Product Warning:
STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
If the weight of the transom above the header exceeds 100 pounds (45.4 kg) the transom will need to be supported from the ceiling to take weight off of the header and prevent bowing. The customer can use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
