CRL Single Seal, Two-Part Polysulfide Insulating Glass Starter Kit

• Apply Two-Part Polysulfide with Brush, Gun, or Trowel
• Hardens as it Cures
• Easy to Assemble and Use

This

CRL Single Seal, Two-Part Polysulfide Insulating Glass Starter Kit

is one of the most economical ways to start fabricating Insulating Glass units. Simply insert corners into the spacer, fill spacers with molecular sieve, add your glass, clamp together, apply the CRL Two-Part Polysulfide, let cure overnight and you're ready for installation. With this system any demand can be responded to immediately; simply measure, fabricate, allow the sealant to cure, and install the next day.

Two-Part Polysulfide Sealant (1.5 Gl. Pail)

4 Pails

5 Pound (2.2 kg) Can Molecular Sieve

2 Cans

1/4" (6 mm) Single Seal Aluminum Spacer

50 Each 12'8"

3/8" (10 mm) Single Seal Aluminum Spacer

25 Each 12'8"

1/2" (12.7 mm) Single Seal Aluminum Spacer

1/4" (6 mm) Single Seal Spacer Corners

200 Each

3/8" (10 mm) Single Seal Spacer Corners

100 Each

1/2" (12.7 mm) Single Seal Spacer Corners

Lint-Free Wipes

1 Case (900 Wipes)

Concentrated Glass Cleaner

1 Gallon (3.785 l)

Plastic Spray Bottles

2 Each

Lint-Free Gloves (Large)

1 Dozen Pairs

White Sil. Acrylic Latex Glazing Sealant

10 Cartridges

Gray Sil. Acrylic Latex Glazing Sealant

Plastic Tipped Handy Clamps

12 Each

Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.