Product Details
- Easy-to-Use Two-Part Conductive Adhesive
- Conductive Adhesive for the Repair of Rear Defroster Power Tabs
- Use heat for faster curing
The CRL Rear Defroster Connector Repair Kit is easy-to-use. Just mix equal parts of Part A Epoxy with Part B Hardener and apply with the supplied applicator stir stick. Apply the connector tab and hold in place for 10 minutes before heating. Always use a minimal amount for fastest cures. Heat cure is highly recommended, cure at 100-150°F (38-65°C) for 30 minutes using a hair dryer, lamp or other heating source. For air cure, ambient temperature must be above 75°F (24°C) for at least 12 hrs to fully cure.
