CRL Brushed Brite Anodized 10 ft Glazing Channel for 3/8 in Glass

• Available for 3/8", 1/2", and 3/4" (10, 12, and 19 mm) glass
• Use Monolithic Tempered Glass
• Dry glazed mechanical glazing channel—no wet silicone required
• Two-piece front-load clamp-on channel for easier installation where lift-and-drop is not possible
• Standard channel requires no holes in the glass (no-drill glass channel)
• Pre-drilled/tapped holes for Channel Clamps every 11-13/16" (300 mm) on center
• Available finishes: Satin Anodized and Brushed Brite Anodized
• Standard 10' (3.05 m) lengths

CRL Mechanical Glazing Channel (SKU: MGC38BBA) is a dry-glazed, two-piece clamp-on system designed for monolithic tempered glass installations where drill-free attachment is preferred. The front-load design simplifies retrofit and field installations; channel clamps are pre-drilled and tapped for consistent spacing. Decorative snap-on covers neaten the visible face; Channel End Caps finish the exposed ends.

Kits include: one Base Channel, ten Channel Clamps with screws, and two Decorative Snap-On Covers. End Caps sold separately.

NOTE: No holes are required in the glass.

Product Warning:

STRUCTURAL DISCLAIMER - Customers must consult a structural engineer to verify suitability for intended use and site conditions. Installers must be qualified and comply with local, state, and federal regulations, and select appropriate fixing materials and procedures.

Highlights: No-drill glass channel • Dry glazed system • Front-load clamp-on design • Pre-drilled clamp spacing • Satin and Brushed Brite anodized finishes • SKU MGC38BBA.

Order the MGC38BBA mechanical glazing channel today for a fast, drill-free glass mounting solution.