Product Details
- Bonds Laminated Glass
- UV and Visible Light Cure
- Medium Viscosity with Capillary Action
- Optically Clear
- Best Adhesion to Plastics
- Acceptable Bondline Gap: 0.5 to 1 mil (.0127 to .0254 mm)
- Tensile/Shear Strength: 1450 psi
CRL UV602 is a medium viscosity, 100% solids, UV/Visible light curable adhesive that bonds to a variety of substrates such as glass, laminated glass, metal, ceramic, and many plastics. It has good capillary action with glass up to 1/4" (6 mm) thick. For thicker glass apply to the bonding surface prior to assembly.
Of particular interest is its suitability for bonding laminated safety glass. The PVB film between laminated glass panes absorbs almost all of the UVA radiation, but because this adhesive has been made to also cure by daylight, it reacts with the remaining radiation (above 380nm) and cures completely. Butt-edge bonding is also no problem, as the adhesive does not affect the PVB film. Cured bonds of CRL UV602 are optically clear, extremely flexible and demonstrate outstanding elongation, making this adhesive ideal for bonding different material combinations. Bonds are tough, durable, exhibit high vibration resistance, and are very resistant to moisture and yellowing. Store adhesive away from sunlight.Cleaner and Degreaser provides for optimum adhesion when used first to prepare the glass by removing any dirt and grease that is present.
NOTE: When bonding plastics, always test first, as not all plastics can be bonded properly. Do not bond any coated parts (powder coated or galvanized) with this adhesive.
Product Warning:
Shelf Life: 12 months from lot # date on label
