Product Details
- Optimized Performance at Elevated Temperatures
- Primerless - No pre-treatment required for glass or frit
- 3-Hour Minimum Drive-Away Time (MDAT)
- Performs to FMVSS 212 requirements
- Application from 40°F - 110°F
- Product : 10-35°C (50-95°F)
- Ambient: 4-43°C (40-110°F)
- Substrate: 4-54°C (40-130°F)
Sikaflex® P2G Premium is a new, high-performance solution designed to complement Sika’s industry-leading primerless AGR product line. Specifically designed for the Automotive Glass Replacement business, it does not require pre-treatment for glass or frit, Sikaflex® P2G Premium enables AGR technicians to simplify the windshield replacement process, while limiting their exposure to potentially harmful VOCs contained in primer and activator materials.
Sikaflex® P2G Premium is a cold-applied, fast curing, and high-viscosity polyurethane adhesive designed for use in replacing direct-glazed automotive glass parts. This product is suitable for experienced, professional users only. Please consult the Product Data Sheet and Safety Data Sheet prior to any use.
SPECIFICATIONS
Chemical Base: 1- Component Polyurethane
Color: Black
Cure Mechanism: Moisture - curing
Non-Sag Properties: Very Good
Application Temperature:Skin Time: 35 minutes
Open Time: 15 minutes
Tensile Strength: 6.5 MPa (940 psi)
Elongation at Break: 600%
Tensile Lap-Shear Strength: 5.0 MPa (720 psi)
Service Temperature: -40 - 93°C (-40 - 200°F)
CGP - Corporate Quality Procedure: A) 23 °C (73 °F) / 50 % r.h. B) Stored below 25 °C (77 °F)
APPLICATION LIMITS:
Avoid contact with alcohol and alcohol containing solvents during cure. Do not apply over silicones or in the presence of curing silicones. Glass parts must always be installed within the open time. The open time is significantly shorter in hot and humid climates. Never install any glass part after the product has built a skin.
NOTE:Please be aware that SIKA products do not come with a 1:1 ratio of nozzles. Each case of 10 cartridges includes ONLY 7 nozzles. This is consistent with industry standards, where the average usage is approximately 1.5 cartridges per application.
If additional nozzles are required, reference under catalog number PP1N0Z (pack quantity: 6) to purchase separately.
