- High-quality formulation for face glazing of wood sash
- Goes on smooth and evenly
CRL Wood Sash Putty (SKU: 500GL) is an off-white glazing putty formulated for face glazing and re-glazing of wood windows and sash. It applies smoothly and evenly, blending with most unfinished wood surfaces for a clean, professional finish. Ideal for traditional wood window repair and restoration projects.
Surfaces should be clean, dry, and frost-free. For best results, prime wood first with an oil-based primer. When re-glazing, remove all old putty and bedding. If necessary, warm and soften the putty by rolling it into coils before application. Shape glazing to an angle that sheds water. Typical dry time before painting is four to six weeks, depending on temperature and humidity. Putty must be painted after it has skinned over and reached a firm set; use a high-quality oil-based paint for best durability. Packaged in factory-sealed plastic containers to preserve freshness and shelf life. Available in five retail-ready sizes.
Technical Data: Meets Federal Specification TT-G-410E; ASTM C669-75, C669, D2249, D2376, C797.
Product Warning:Do not thin putty. Never add solvents, oils, or color pigments — the putty cannot be tinted or diluted.
Mixing Instructions: Mix the ENTIRE contents of the container prior to use. Empty the entire container onto glass or a plastic surface and work the oils into the putty until uniform. Do NOT mix small portions (they may be too dry or too oily). Do NOT mix on cardboard, which will absorb oils.
Check the spec data sheet for additional application guidelines and limitations.
Note: Best-by shelf life is 6–8 months when stored sealed and properly.
Most shipping weights are approximate and have not been verified. If exact weight or shipping cost is required to complete your order, contact CRL Customer Service before submitting your order. Product images are of the actual product or a close representation; colors may vary by monitor.