Product Details
- For Use with Top and Bottom Inserts
- High Density Cast Body
- Gaskets for Use With 3/8" or 1/2" (10 or 12 mm) Glass
- 1NT303 for top
- 1NT301 for bottom Glass Fabrication Required:
- One Corner Notch Includes:
- Cover Plates (Finish of Your Choice)
- Gaskets for 3/8" or 1/2" (10 or 12 mm)
- Template and Instructions Product Warning: These fittings are not for use with Laminated Glass. The following guidelines are to be used when making a 1/2" glass door using this hardware: Maximum Height: 102" (2.59 m) Maximum Height: 176 Lbs. (80 kg) Maximum Width: 42" (1.09 m) If the door exceeds any of these limitations, full door rails should be used. Brass Finish Advisory: Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.
This CRL American T/B Door Patch (Less Insert) will allow you to use the same fitting for either top or bottom by simply installing the appropriate insert.
For Use with Top and Bottom Inserts:
1NT303 for top 1NT301 for bottom
Glass Fabrication Required:
One Corner Notch
Includes:
High Density Cast Body
Cover Plates (Finish of Your Choice)
Gaskets for 3/8" or 1/2" (10 or 12 mm)
Template and Instructions
Product Warning:
These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Height: 176 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Brass Finish Advisory:Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.
