Most shipping weights are approximate. If exact weight is required to determine shipping costs, contact CRL Customer Service before ordering. Product images represent the item; actual color may vary by monitor.
CRL
CRL Bronze 321 Acrylic-Latex Silicone Caulk - Paintable Sealant
CRL Bronze 321 Acrylic-Latex Silicone Caulk - Paintable Sealant
Couldn't load pickup availability
Shipping Weight: 1.06 Pounds
Shipping Limitations: None
Minimum Order Quantity: 1
Unit of Measure: each
Compliance and Restrictions
Warning: Reproductive Harm
www.p65warnings.ca.gov

Description
Overview
- Suitable for glazing insulating glass units in wood frames
- For exterior or interior use
- Paintable with oil or latex based paints
- Mildew resistant
CRL 321 Acrylic Latex with Silicone (SKU: 321BRZ) is a premium acrylic-latex caulk enhanced with silicone for improved flexibility and adhesion to glass and ceramic. It combines acrylic’s long-term resistance to oxidation and UV with silicone’s flexibility for a durable, weather-resistant seal. Water clean-up and low shrinkage make it easy to use.
Key features & long-tail benefits:
- Primerless adhesion to wood, brick, glass, plastic, vinyl, plaster, drywall, metal, and ceramics
- Suitable for glazing insulating glass units and storm windows in wood frames
- Mildew-resistant, paintable caulk for showers, bathrooms, sinks, kitchens, window and door frames, siding, trim, thresholds, and baseboards
- Easy tooling and water cleanup; can be tooled for approximately 30 minutes
- Paintable after two hours with oil or latex paints
- Capable of ±10% joint movement in a well-designed joint
Performance & application conditions: Apply in temperatures between 40°F and 120°F (4°C to 49°C). After full cure, withstands temperatures from 0°F to 180°F (-17°C to 82°C). Suitable for interior and exterior use; odor-free and weatherable. Not for continuous immersion.
Technical data: Exceeds ASTM C-834-00 for latex sealing compounds and meets ASTM C-920 and TT-S-00230C. Meets California Air Resources Board 2003 VOC requirements and qualifies for LEED® credit.
Limitations & warnings: Do not use where the product will be continuously immersed. Protect from water or rain for at least 24 hours after application. Always apply when temperatures are above 40°F (4°C) and protect from freezing until fully cured. Check cartridge label and the Specification Data Sheet for additional limitations.
Order CRL 321 Acrylic Latex with Silicone (SKU: 321BRZ) for a paintable, mildew-resistant sealant ideal for glazing insulating glass and general exterior/interior caulking — add to cart now
